0bps

Strategy vault / Mean reversion

Long Reversal Strategy Based on Ultimate Oscillator

This strategy is named "Long Reversal Strategy Based on Ultimate Oscillator". It uses the Ultimate Oscillator to judge overbought/oversold levels and enters counter-trend long trades when the indicator reaches…

Author
ChaoZhang
Complexity
Intermediate · 161 lines
Parameters
11
Backtest bar
5m · intraday
Tested on
BTC/USDT · futures

This strategy is named "Long Reversal Strategy Based on Ultimate Oscillator". It uses the Ultimate Oscillator to judge overbought/oversold levels and enters counter-trend long trades when the indicator reaches oversold levels.

The Ultimate Oscillator incorporates price information across multiple periods to gauge market overbought/oversold conditions. When the indicator crosses below a low point, it signals an oversold market and hints at a possible price bounce.

The trading logic is:

  1. When the Ultimate Oscillator crosses below a low level (such as 45), the market is oversold and long trades are considered.

  2. Continue holding long positions until the indicator crosses above a middle level (such as 70) for taking profit.

  3. Set a stop loss line so positions are stopped out if price breaches the line. If indicator shows bullish divergence, stop can be adjusted accordingly.

  4. If indicator crosses below the low point again, adding to long positions can be considered.

The advantage of this strategy is capturing oversold bounce opportunities. But optimization of parameters is needed, and the lagging nature of the indicator calls for combining trend analysis. Stop loss and money management are also critical.

In conclusion, using indicators to determine reversal timing is common. But traders still need discretion and should not purely rely on any single indicator.

Parameters

NameDefaultWhat it controls
v_input_15length1
v_input_210length2
v_input_315length3
v_input_49Signal length
v_input_545Buy Line (UO crossing up oversold at )
v_input_670Exit Line (UO crsossing down overbought at)
v_input_710Risk % of capital
v_input_83Stop Loss
v_input_9falseTake Profit
v_input_1075Take Profit at RSIofUO crossing below this value
v_input_11trueshow Signal Line

Source Pine Script

/*backtest
start: 2023-09-11 00:00:00
end: 2023-09-12 00:00:00
period: 5m
basePeriod: 1m
exchanges: [{"eid":"Futures_Binance","currency":"BTC_USDT"}]
*/

// This source code is subject to the terms of the Mozilla Public License 2.0 at https://mozilla.org/MPL/2.0/
// © mohanee

//@version=4

strategy(title="Ultimate Oscillator [Long] Strategy",  shorttitle="UO" , overlay=false, pyramiding=2,     default_qty_type=strategy.percent_of_equity,  default_qty_value=20, initial_capital=10000, currency=currency.USD)  //default_qty_value=10, default_qty_type=strategy.fixed,

	
//Ultimate Oscillator logic copied from  TradingView   builtin indicator
/////////////////////////////////////////////////////////////////////////////////
length1 = input(5, minval=1), length2 = input(10, minval=1), length3 = input(15, minval=1)


//rsiUOLength = input(7, title="RSI UO length", minval=1)

signalLength = input(9, title="Signal length", minval=1)

buyLine = input (45, title="Buy Line (UO crossing up oversold at ) ")       //crossover
exitLine = input (70, title="Exit Line (UO crsossing down overbought at) ")      //crossunder


riskCapital = input(title="Risk % of capital", defval=10, minval=1)
stopLoss=input(3,title="Stop Loss",minval=1)

takeProfit=input(false, title="Take Profit")
profitExitLine = input (75, title="Take Profit at RSIofUO crossing below this value ") //crossunder


showSignalLine=input(true, "show Signal Line")
//showUO=input(false, "show Ultimate Oscialltor")


average(bp, tr_, length) => sum(bp, length) / sum(tr_, length)
high_ = max(high, close[1])
low_ = min(low, close[1])
bp = close - low_
tr_ = high_ - low_
avg7 = average(bp, tr_, length1)
avg14 = average(bp, tr_, length2)
avg28 = average(bp, tr_, length3)
ultOscVal = 100 * (4*avg7 + 2*avg14 + avg28)/7
//Ultimate Oscillator 
/////////////////////////////////////////////////////////////////////////////////

//Willimas Alligator  copied from  TradingView built in Indicator
/////////////////////////////////////////////////////////////////////////////////
smma(src, length) =>
	smma =  0.0
	smma := na(smma[1]) ? sma(src, length) : (smma[1] * (length - 1) + src) / length
	smma

//moving averages logic copied from Willimas Alligator -- builtin indicator in TradingView
sma1=smma(hl2,5)
sma2=smma(hl2,20)
sma3=smma(hl2,50)

//Willimas Alligator
/////////////////////////////////////////////////////////////////////////////////

myVwap= vwap(hlc3)

//drawings
/////////////////////////////////////////////////////////////////////////////////
hline(profitExitLine, title="Middle Line 60  [Profit Exit Here]", color=color.purple  , linestyle=hline.style_dashed)

obLevelPlot = hline(exitLine, title="Overbought",  color=color.red , linestyle=hline.style_dashed)
osLevelPlot = hline(buyLine, title="Oversold", color=color.blue, linestyle=hline.style_dashed)

//fill(obLevelPlot, osLevelPlot, title="Background", color=color.blue, transp=90)
//rsiUO = rsi(ultOscVal,rsiUOLength)

rsiUO=ultOscVal

//emaUO = ema(rsiUO, 9)

//signal line
emaUO = ema(ultOscVal , 5)     // ema(ultOscVal / rsiUO, 9)

//ultPlot=plot(showUO==true? ultOscVal : na, color=color.green, title="Oscillator")

plot(rsiUO, title = "rsiUO" ,  color=color.purple)
plot(showSignalLine ? emaUO : na , title = "emaUO [signal line]" ,  color=color.blue)  //emaUO

//drawings
/////////////////////////////////////////////////////////////////////////////////




//Strategy Logic 
/////////////////////////////////////////////////////////////////////////////////

longCond=  crossover(rsiUO, buyLine)  or crossover(rsiUO, 30)


//longCond= ( ema10>ema20 and crossover(rsiUO, buyLine) ) or ( ema10 < ema20 and crossover(rsiUO, 75)  )

//Entry--
//Echeck how many units can be purchased based on risk manage ment and stop loss
qty1 = (strategy.equity  * riskCapital / 100 ) /  (close*stopLoss/100)  

//check if cash is sufficient  to buy qty1  , if capital not available use the available capital only
qty1:= (qty1 * close >= strategy.equity ) ? (strategy.equity / close) : qty1



//strategy.entry(id="LERSIofUO", long=true,   qty=qty1,  when = close > open and  barssince(longCond)<=3  and strategy.position_size<1 )  //and sma1 > sma3)  //  and close>open and  rsiUO >= 25 )   //and


strategy.entry(id="LEUO", long=true,   qty=qty1,  when = close > open and  barssince(longCond)<=3  and strategy.position_size<1  and sma2 > sma3)  //  and close>open and  rsiUO >= 25 )   //and


//Add
//strategy.entry(id="LEUO", comment="Add" , qty=qty1/2 ,  long=true,   when = strategy.position_size>=1 and close < strategy.position_avg_price and crossover(rsiUO, 60) )  //and sma1 > sma3)  //  and close>open and  rsiUO >= 25 )   //and


//strategy.entry(id="LEUO", long=true,   qty=qty1, when = close > open and  barssince(longCond)<=10  and valuewhen(longCond , close , 1)  > close  and rsiUO>=30) //  and close>open and  rsiUO >= 25 )   //and 

//for Later versions
//also check for divergence  ... later version
//also check if close above vwap session

//strategy.entry(id="LEUO", long=false, when = sma1< sma2  and crossunder(rsiUO,60) )

//change the bar color to yellow , indicating startegy will trigger BUY
barcolor( close > open and  barssince(longCond)<=3  and strategy.position_size<1  and sma2 > sma3 ? color.orange : na)


//barcolor(abs(strategy.position_size)>=1 ? color.blue : na )
bgcolor(abs(strategy.position_size)>=1 ? color.blue : na , transp=70)

//signal for addition to existing position 
barcolor( strategy.position_size>=1 and close < strategy.position_avg_price and crossover(rsiUO, 60) ? color.yellow : na)
//bgcolor( strategy.position_size>=1 and close < strategy.position_avg_price and crossover(rsiUO, 60)  ? color.yellow : na, transp=30)

//partial exit
strategy.close(id="LEUO", comment="PExit",  qty=strategy.position_size/3, when= takeProfit and abs(strategy.position_size)>=1 and close > strategy.position_avg_price and crossunder(rsiUO,profitExitLine) )


//close the Long order
strategy.close(id="LEUO", comment="Profit is "+tostring(close - strategy.position_avg_price,  "###.##"), when=abs(strategy.position_size)>=1 and crossunder(rsiUO,exitLine) ) //and close > strategy.position_avg_price )
//strategy.close(id="LEUO", comment="CloseAll", when=abs(strategy.position_size)>=1 and crossunder(rsiUO2,40) ) //and close > strategy.position_avg_price )

// stop loss exit
stopLossVal = strategy.position_size>=1 ?  strategy.position_avg_price * ( 1 - (stopLoss/100) ) : 0.00
strategy.close(id="LEUO", comment="SL exit Loss is  "+tostring(close - strategy.position_avg_price,  "###.##") , when=abs(strategy.position_size)>=1 and close < stopLossVal and rsiUO < exitLine)   
//reason to rsiUO <30 is if price is going down , indicator should reflect it ... but indicator is above 30 means it showing divergence... so hold on it until it crossdown 30 ...that way even Stop Loss less than predefined ...


//Strategy Logic 
/////////////////////////////////////////////////////////////////////////////////

Published by ChaoZhang on the FMZ strategy square · last modified 2023-09-13. Collected in the Quant Trading Vault. Unvalidated research: re-test with your own data and costs before trusting it.

Build this with AgenKit

A spec is not a trading system. Paste this into your coding agent and AgenKit runs a specialist team — architecture, test-first build, risk gates, review — with paper trading on by default.

in Claude Code, Cursor, Codex & 4 more
/agenkit build a production-grade trading bot with a backtest engine, risk controls and paper trading by default from strategies/Long-Reversal-Strategy-Based-on-Ultimate-Oscillator.md
  1. npx agenkit install engineering-kit in your project
  2. Paste the command into your agent and approve each phase
  3. Get tests, backtest, risk controls and a paper-trading switch

Understand it first

Before you run this, read the lesson behind the idea and how to backtest it honestly. Specs like this one are the survivors of an unknown number of trials; deflate their results accordingly.

Related specs

esc

Try , , or .

↑↓ move↵ open