baguette by multigrain

Rationale The rationale behind this indicator is that: when the price of an asset reaches an extreme, regardless of the trend, there is a (maybe not equal but) opposite reaction. Settings The default settings will…

Pine ScriptTrend following SMA ATR

Author: ChaoZhang
Complexity: Intermediate · 118 lines
Parameters: 5
Backtest bar: 1h · intraday
Tested on: BTC/USDT · futures

Jump to code View in vault Original on FMZ

Rationale The rationale behind this indicator is that: when the price of an asset reaches an extreme, regardless of the trend, there is a (maybe not equal but) opposite reaction.

Settings The default settings will not be the best for whatever timeframe you choose. I personally believe a longer than 'normal' JMA Length is best.

JMA Source: The source in which the Jurik Moving Average calculations are based off of. JMA Length: Controls the length of the Jurik Moving Average. JMA Phase: A lag controller of sorts. Increasing the phase increases overshoots but reduces lag, decreasing the phase decreases overshoots but increases lag.

ATR Length: The length in which an average true range value will be calculated with. ATR Multiplier: This multiplier controls the 'width' of our envelope or our extreme bands.

Credits @gorx1 for the improved and more accurate (?) Jurik Moving Average calculations. @redktrader for the ATR envelope calculations.

backtest

Parameters

Name	Default	What it controls
v_input_source_1_hlc3	0	(?JMA)JMA Source: hlc3 \| high \| low \| open \| hl2 \| close \| hlcc4 \| ohlc4
v_input_int_1	144	JMA Length
v_input_int_2	34	JMA Phase
v_input_int_3	34	(?Envelope)ATR Length
v_input_float_1	3	ATR Multiplier

Source Pine Script

/*backtest
start: 2022-04-07 00:00:00
end: 2022-05-06 23:59:00
period: 1h
basePeriod: 15m
exchanges: [{"eid":"Futures_Binance","currency":"BTC_USDT"}]
*/

// This source code is subject to the terms of the Mozilla Public License 2.0 at https://mozilla.org/MPL/2.0/
// © multigrain
//@version=5

indicator('baguette by multigrain', 'baguette', overlay = true)
//NAME            TYPE               DEFVAL     TITLE               MIN     MAX         GROUP       
jmaSrc          = input.source      (hlc3,      'JMA Source',                           group='JMA')
jmaLen          = input.int         (144,       'JMA Length',                           group='JMA')
jmaPhs          = input.int         (34,        'JMA Phase',        -100,   100,        group='JMA')


atrLen          = input.int         (34,        'ATR Length',                           group='Envelope')
atrMul          = input.float       (3,       'ATR Multiplier',                       group='Envelope')


// Jurik Moving Average
// credit to @gorx1
f_jma(_src, _length, _phase) =>
    lower_band  = _src
    upper_band  = _src
    del2        = math.abs(_src - lower_band[1])
    del1        = math.abs(_src - upper_band[1])

    vola        = del1 == del2 ? 0 : math.max(del1, del2)

    vola_sum    = 0.0
    vola_sum    := nz(vola_sum[1]) + 0.1 * (vola - vola[10])

    avg_len     = 65

    y           = bar_index + 1

    avg_vola    = 0.0
    avg_vola    := if y <= avg_len + 1
        nz(avg_vola[1]) + 2.0 * (vola_sum - nz(avg_vola[1])) / (avg_len + 1)
    else
        ta.sma(vola_sum, avg_len)

    len         = 0.5 * (_length - 1)
    len1        = math.max(math.log(math.sqrt(len)) / math.log(2) + 2, 0)
    pow1        = math.max(len1 - 2, 0.5)

    r_vola      = avg_vola > 0 ? vola / avg_vola : 0
    r_vola      := if r_vola > math.pow(len1, 1 / pow1)
        math.pow(len1, 1 / pow1)
    else if r_vola < 1
        1
    else
        r_vola

    pow2        = math.pow(r_vola, pow1)
    len2        = math.sqrt(len) * len1
    bet         = len2 / (len2 + 1)
    kv          = math.pow(bet, math.sqrt(pow2))

    lower_band  := y == 1 ? _src : del2 < 0 ? _src : _src - kv * del2
    upper_band  := y == 1 ? _src : del1 < 0 ? _src : _src + kv * del1

    beta        = 0.45 * (len - 1) / (0.45 * (len - 1) + 2)
    pr          = _phase < -100 ? 0.5 : _phase > 100 ? 2.5 : _phase / 100 + 1.5
    alpha       = math.pow(beta, pow2)

    ma1         = 0.0
    det0        = 0.0
    jma         = 0.0
    det1        = 0.0

    ma1         := (1 - alpha) * _src + alpha * nz(ma1[1])
    det0        := (_src - ma1) * (1 - beta) + beta * nz(det0[1])
    ma2         = ma1 + pr * det0
    det1        := (ma2 - nz(jma[1])) * math.pow(1 - alpha, 2) + math.pow(alpha, 2) * nz(det1[1])
    jma         := nz(jma[1]) + det1
    jma


// Jurik Moving Average Envelope
// credit to @redktrader
f_atrEnv(_src, _length, _multiplier) =>
    atr         = ta.atr(_length) * _multiplier
    atr_us      = atr
    atr_ls      = atr
    atr_us      := ta.change(_src) != 0 ? atr : atr_us[1]
    atr_ls      := ta.change(_src) != 0 ? atr : atr_ls[1]
    atr_upper   = _src + atr_us
    atr_lower   = _src - atr_ls
    [atr_upper, atr_lower]



// Calculations
j               = f_jma(jmaSrc, jmaLen, jmaPhs)
[j_up, j_low]   = f_atrEnv(j, atrLen, atrMul)
long            = ta.crossover(hlc3, j_low) ? close : na
short           = ta.crossunder(hlc3, j_up) ? close : na

// Colors
green           = #0F7173  
red             = #F05D5E 
tan             = #D8A47F
white           = #FFFFFF
           
// Plots
plot            (j,         'JMA Centerline', tan, display=display.none)
plot            (j_up,      'ATR Upper', green)
plot            (j_low,     'ATR Lower', red)
// Alerts
if long
    strategy.entry("Enter Long", strategy.long)
else if short
    strategy.entry("Enter Short", strategy.short)

Published by ChaoZhang on the FMZ strategy square · last modified 2022-05-09. Collected in the Quant Trading Vault. Unvalidated research: re-test with your own data and costs before trusting it.

Build this with AgenKit

A spec is not a trading system. Paste this into your coding agent and AgenKit runs a specialist team — architecture, test-first build, risk gates, review — with paper trading on by default.

in Claude Code, Cursor, Codex & 4 more

/agenkit build a production-grade trading bot with a backtest engine, risk controls and paper trading by default from strategies/baguette-by-multigrain.md

npx agenkit install engineering-kit in your project
Paste the command into your agent and approve each phase
Get tests, backtest, risk controls and a paper-trading switch

Get AgenKit How /agenkit works

Understand it first

Before you run this, read the lesson behind the idea and how to backtest it honestly. Specs like this one are the survivors of an unknown number of trials; deflate their results accordingly.

Parameters

Source Pine Script

Build this with AgenKit

Understand it first

Related specs