0bps

Strategy vault / Multi-timeframe

Multi Timeframe Moving Average Trading Strategy

This strategy uses moving average crossovers between different timeframes to generate trading signals. It allows observing longer timeframe MAs on current chart to detect larger trends. This belongs to…

Author
ChaoZhang
Complexity
Intermediate · 86 lines
Parameters
13
Backtest bar
7d · position
Tested on
BTC/USDT · futures

Overview

This strategy uses moving average crossovers between different timeframes to generate trading signals. It allows observing longer timeframe MAs on current chart to detect larger trends. This belongs to inter-timeframe trend following strategies.

Strategy Logic

The strategy uses two moving averages calculated on separate timeframes.

For example on 15min chart it uses 20MA and 50MA:

  • 20MA is calculated on current 15min bars
  • 50MA is calculated on daily bars

When 15min 20MA crosses above daily 50MA, it goes long. When 15min 20MA crosses below daily 50MA, it goes short.

This achieves the effect of observing longer timeframe trends on current period. Custom MA lengths are also allowed.

Crossover points can be marked for clear trade signals.

Advantages

  • Analyze across timeframes, discover larger trends
  • Higher TF lines more stable, avoiding false signals
  • Lower TF lines more sensitive, catching trend changes fast
  • Customizable MA periods combinations
  • Clear marked signals on chart

Risks

  • Increased complexity with multiple timeframes
  • Lower TF false signals still possible
  • Overall lagging with MA systems, may miss best entries
  • Limited filtering with pure MA system
  • Period tuning needed for different products

Risks can be reduced by:

  • Keeping longer high TF MAs for robust trend direction
  • Adding other indicators for further signal filtering
  • Optimizing MA periods for best combinations
  • Relaxing entry rules like adding candlestick patterns

Enhancement Directions

The strategy can be improved by:

  1. Testing more MA period combinations for optimization

  2. Adding secondary confirmation when crossover happens

    e.g. check MACD momentum

  3. Optimizing stops to avoid premature exit

    Consider Post123 evidence to decide exits

  4. Different filters for short and long TF

    More strict for short TF, more relaxed for long TF

  5. Consider different parameter sets for different sessions

    Market conditions vary by sessions

Summary

This strategy observes crossovers between MAs of multiple timeframes to determine trend direction and uncover larger trends. This filters out short-term noises and focuses on larger price moves. However, challenges like timeframe tuning and lagging signals exist. Enhancements can be made via rigorous backtesting and optimization for robust parameters, adding filters for confirmation, live validation for continuous improvements according to market feedback. Persistent learning and optimization is key to adaptivity.

Parameters

NameDefaultWhat it controls
v_input_1trueUse Current Chart Resolution?
v_input_2DUse Different Timeframe? Uncheck Box Above
v_input_320Moving Average Length - LookBack Period
v_input_4true1=SMA, 2=EMA, 3=WMA, 4=HullMA, 5=VWMA, 6=RMA, 7=TEMA
v_input_5trueChange Color Based On Direction?
v_input_62Color Smoothing - 1 = No Smoothing
v_input_7falseOptional 2nd Moving Average
v_input_850Moving Average Length - Optional 2nd MA
v_input_9true1=SMA, 2=EMA, 3=WMA, 4=HullMA, 5=VWMA, 6=RMA, 7=TEMA
v_input_10trueChange Color Based On Direction 2nd MA?
v_input_11false***You Can Turn On The Show Dots Parameter Below Without Plotting 2nd MA to See Crosses***
v_input_12false***If Using Cross Feature W/O Plotting 2ndMA - Make Sure 2ndMA Parameters are Set Correctly***
v_input_13falseShow Dots on Cross of Both MA's

Source Pine Script

/*backtest
start: 2022-09-14 00:00:00
end: 2023-09-20 00:00:00
period: 7d
basePeriod: 1d
exchanges: [{"eid":"Futures_Binance","currency":"BTC_USDT"}]
*/

//@version=2

//Run script on a long interval gives better result for e.g. 1 Day
//Plots The Majority of Moving Averages
//Defaults to Current Chart Time Frame --- But Can Be Changed to Higher Or Lower Time Frames
//2nd MA Capability with Show Crosses Feature
//study(title="CM_Ultimate_MA_MTF", shorttitle="CM_Ultimate_MA_MTF", overlay=true)
strategy("Stratergy CM_Ultimate_MA_MTF", shorttitle = "Stratergy CM_Ultimate_MA_MTF", overlay = true) 
//,default_qty_type = strategy.percent_of_equity, default_qty_value=100.0, pyramiding=0)

//inputs
src = close
useCurrentRes = input(true, title="Use Current Chart Resolution?")
resCustom = input(title="Use Different Timeframe? Uncheck Box Above",  defval="D")
len = input(20, title="Moving Average Length - LookBack Period")
atype = input(1,minval=1,maxval=7,title="1=SMA, 2=EMA, 3=WMA, 4=HullMA, 5=VWMA, 6=RMA, 7=TEMA")
cc = input(true,title="Change Color Based On Direction?")
smoothe = input(2, minval=1, maxval=10, title="Color Smoothing - 1 = No Smoothing")
doma2 = input(false, title="Optional 2nd Moving Average")
len2 = input(50, title="Moving Average Length - Optional 2nd MA")
atype2 = input(1,minval=1,maxval=7,title="1=SMA, 2=EMA, 3=WMA, 4=HullMA, 5=VWMA, 6=RMA, 7=TEMA")
cc2 = input(true,title="Change Color Based On Direction 2nd MA?")
warn = input(false, title="***You Can Turn On The Show Dots Parameter Below Without Plotting 2nd MA to See Crosses***")
warn2 = input(false, title="***If Using Cross Feature W/O Plotting 2ndMA - Make Sure 2ndMA Parameters are Set Correctly***")
sd = input(false, title="Show Dots on Cross of Both MA's")


res = useCurrentRes ? timeframe.period : resCustom
//hull ma definition
hullma = wma(2*wma(src, len/2)-wma(src, len), round(sqrt(len)))
//TEMA definition
ema1 = ema(src, len)
ema2 = ema(ema1, len)
ema3 = ema(ema2, len)
tema = 3 * (ema1 - ema2) + ema3

avg = atype == 1 ? sma(src,len) : atype == 2 ? ema(src,len) : atype == 3 ? wma(src,len) : atype == 4 ? hullma : atype == 5 ? vwma(src, len) : atype == 6 ? rma(src,len) : tema
//2nd Ma - hull ma definition
hullma2 = wma(2*wma(src, len2/2)-wma(src, len2), round(sqrt(len2)))
//2nd MA TEMA definition
sema1 = ema(src, len2)
sema2 = ema(sema1, len2)
sema3 = ema(sema2, len2)
stema = 3 * (sema1 - sema2) + sema3

avg2 = atype2 == 1 ? sma(src,len2) : atype2 == 2 ? ema(src,len2) : atype2 == 3 ? wma(src,len2) : atype2 == 4 ? hullma2 : atype2 == 5 ? vwma(src, len2) : atype2 == 6 ? rma(src,len2) : tema

out = avg 
out_two = avg2

out1 = security(syminfo.tickerid, res, out)
out2 = security(syminfo.tickerid, res, out_two)

ma_up = out1 >= out1[smoothe]
ma_down = out1 < out1[smoothe]

col = cc ? ma_up ? lime : ma_down ? red : aqua : aqua
col2 = cc2 ? ma_up ? lime : ma_down ? red : aqua : aqua

circleYPosition = out2
chk=col==red?1:0

if (not na(chk))
    if (chk[1]==1 and chk==0)
        strategy.entry("RsiLE", strategy.long, comment="RsiLE")
    else
        strategy.exit("RsiLE")

    if (chk[1]==0 and chk==1)
        strategy.entry("RsiSE", strategy.short, comment="RsiLE")
    else
        strategy.exit("RsiSE")
        
plot(out1, title="Multi-Timeframe Moving Avg", style=line, linewidth=4, color = col)
plot(doma2 and out2 ? out2 : na, title="2nd Multi-TimeFrame Moving Average", style=circles, linewidth=4, color=col2)
plot(sd and cross(out1, out2) ? circleYPosition : na,style=cross, linewidth=5, color=yellow)

Published by ChaoZhang on the FMZ strategy square · last modified 2023-09-21. Collected in the Quant Trading Vault. Unvalidated research: re-test with your own data and costs before trusting it.

Build this with AgenKit

A spec is not a trading system. Paste this into your coding agent and AgenKit runs a specialist team — architecture, test-first build, risk gates, review — with paper trading on by default.

in Claude Code, Cursor, Codex & 4 more
/agenkit build a production-grade trading bot with a backtest engine, risk controls and paper trading by default from strategies/Multi-Timeframe-Moving-Average-Trading-Strategy.md
  1. npx agenkit install engineering-kit in your project
  2. Paste the command into your agent and approve each phase
  3. Get tests, backtest, risk controls and a paper-trading switch

Understand it first

Before you run this, read the lesson behind the idea and how to backtest it honestly. Specs like this one are the survivors of an unknown number of trials; deflate their results accordingly.

Related specs

esc

Try , , or .

↑↓ move↵ open