0bps

Strategy vault / Breakout

Follow Line Strategy

The Follow Line strategy is a trend tracking strategy based on Bollinger Bands and Average True Range (ATR). It dynamically adjusts the trend judgment line to track the trend by shifting it up when price breaks above…

Author
ChaoZhang
Complexity
Intermediate · 104 lines
Parameters
14
Backtest bar
10m · intraday
Tested on
BTC/USDT · futures

IMG

Overview

The Follow Line strategy is a trend tracking strategy based on Bollinger Bands and Average True Range (ATR). It dynamically adjusts the trend judgment line to track the trend by shifting it up when price breaks above Bollinger Bands upper band and shifting it down when price breaks below Bollinger Bands lower band.

Strategy Logic

The strategy first calculates the upper and lower bands of Bollinger Bands, as well as Average True Range. Then it judges whether price breaks above the Bollinger upper band or below the lower band.

When price breaks above the upper band, if ATR filter is enabled, the trend line is set to the lowest price minus ATR. If ATR filter is disabled, the trend line is set directly to the lowest price.

When price breaks below the lower band, if ATR filter is enabled, the trend line is set to the highest price plus ATR. If ATR filter is disabled, the trend line is set directly to the highest price.

Thus, the trend judgment line can be dynamically adjusted based on the price breakouts of Bollinger Bands to track the trend.

When current trend line is higher than previous one, it indicates an upward trend. When current trend line is lower than previous one, it indicates a downward trend.

Trading signals can then be generated based on the trend judgment to go long or short.

Advantages Analysis

  • Dynamically adjusting trend line can flexibly capture price trends
  • Combining with Bollinger Bands can timely judge trend reversal on band breakouts
  • Introducing ATR filter can avoid some false breakout signals

Risk Analysis

  • Improper BB parameters may cause frequent false breakouts
  • Excessive ATR parameter may miss trend reversal opportunities
  • Need to consider stop loss to prevent losses from extreme moves

Some risks can be mitigated via parameter tuning, introducing stop loss. Can also combine with other indicators for signal filtering to improve breakout validity.

Optimization Directions

  • Optimize BB and ATR parameters to find best configurations
  • Add other indicators to filter false breakouts
  • Select BB and ATR periods based on specific trading instruments

Conclusion

The Follow Line strategy aims to capture price trends in volatile markets. It is an effective trend tracking strategy. Proper parameter tuning and optimizations can lead to decent profits. However, risks need to be managed via stop loss and preventing false breakouts. It is recommended to combine this strategy with other indicators or strategies to further improve profitability.

Parameters

NameDefaultWhat it controls
v_input_1true═══════════════ From ═══════════════
v_input_2trueMonth
v_input_3trueDay
v_input_42014Year
v_input_5true════════════════ To ════════════════
v_input_631Month
v_input_712Day
v_input_89999Year
v_input_9true══════════════ Config ══════════════
v_input_1021BB Period
v_input_11trueBB Deviations
v_input_12trueATR Filter
v_input_135ATR Period
v_input_14falseHide Labels

Source Pine Script

/*backtest
start: 2023-11-23 00:00:00
end: 2023-11-30 00:00:00
period: 10m
basePeriod: 1m
exchanges: [{"eid":"Futures_Binance","currency":"BTC_USDT"}]
*/

// © Dreadblitz
//@version=4
//
// ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ //

strategy(title = " Strategy Follow Line Indicator ",
         shorttitle = "S-FLI",
         overlay = true,
         precision = 8,
         calc_on_order_fills = true,
         calc_on_every_tick = true,
         backtest_fill_limits_assumption = 0,
         default_qty_type = strategy.fixed,
         default_qty_value = 2,
         initial_capital = 10000,
         pyramiding=1,
         currency = currency.USD,
         linktoseries = true)

//
// ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ //

backTestSectionFrom = input(title = "═══════════════ From ═══════════════", defval = true, type = input.bool)

FromMonth         = input(defval = 1, title = "Month", minval = 1)
FromDay           = input(defval = 1, title = "Day", minval = 1)
FromYear          = input(defval = 2014, title = "Year", minval = 2000)

backTestSectionTo = input(title = "════════════════ To ════════════════", defval = true, type = input.bool)
ToMonth           = input(defval = 31, title = "Month", minval = 1)
ToDay             = input(defval = 12, title = "Day", minval = 1)
ToYear            = input(defval = 9999, title = "Year", minval = 2000)

Config            = input(title = "══════════════ Config ══════════════", defval = true, type = input.bool)
BBperiod          = input(defval = 21,     title = "BB Period",    type = input.integer, minval = 1)
BBdeviations      = input(defval = 1.00,     title = "BB Deviations",    type = input.float, minval = 0.1, step=0.05)
UseATRfilter      = input(defval = true, title = "ATR Filter",  type = input.bool)
ATRperiod         = input(defval = 5,     title = "ATR Period",    type = input.integer, minval = 1)
hl                = input(defval = false, title = "Hide Labels",  type = input.bool)


backTestPeriod() => true

//
//
// ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ //

BBUpper=sma (close,BBperiod)+stdev(close, BBperiod)*BBdeviations
BBLower=sma (close,BBperiod)-stdev(close, BBperiod)*BBdeviations
//
TrendLine = 0.0
iTrend = 0.0
buy = 0.0
sell = 0.0
//
BBSignal = close>BBUpper? 1 : close<BBLower? -1 : 0
// 
if BBSignal == 1 and UseATRfilter == 1
    TrendLine:=low-atr(ATRperiod)
    if TrendLine<TrendLine[1] 
        TrendLine:=TrendLine[1]
if BBSignal == -1 and UseATRfilter == 1
    TrendLine:=high+atr(ATRperiod)
    if TrendLine>TrendLine[1]
        TrendLine:=TrendLine[1]
if BBSignal == 0 and UseATRfilter == 1
    TrendLine:=TrendLine[1]
//
if BBSignal == 1 and UseATRfilter == 0
    TrendLine:=low
    if TrendLine<TrendLine[1] 
        TrendLine:=TrendLine[1]
if BBSignal == -1 and UseATRfilter == 0
    TrendLine:=high
    if TrendLine>TrendLine[1]
        TrendLine:=TrendLine[1]
if BBSignal == 0 and UseATRfilter == 0
    TrendLine:=TrendLine[1]
//
iTrend:=iTrend[1]
if TrendLine>TrendLine[1] 
    iTrend:=1
if TrendLine<TrendLine[1] 
    iTrend:=-1
//
buy:=iTrend[1]==-1 and iTrend==1 ? 1 : na
sell:=iTrend[1]==1 and iTrend==-1? 1 : na
//
plot(TrendLine, color=iTrend > 0?color.blue:color.red ,style=plot.style_line,linewidth=2,transp=0,title="Trend Line") 
plotshape(buy == 1 and hl == false? TrendLine-atr(8) :na, text='?', style= shape.labelup, location=location.absolute, color=color.blue, textcolor=color.white, offset=0, transp=0,size=size.auto)
plotshape(sell == 1 and hl == false ?TrendLine+atr(8):na, text='?', style=shape.labeldown, location=location.absolute, color=color.red, textcolor=color.white, offset=0, transp=0,size=size.auto)

// Strategy Entry
if (backTestPeriod())
    strategy.entry("long", true, 1, when = buy == 1)
    strategy.entry("short", false, 1, when = sell == 1) 

Published by ChaoZhang on the FMZ strategy square · last modified 2023-12-01. Collected in the Quant Trading Vault. Unvalidated research: re-test with your own data and costs before trusting it.

Build this with AgenKit

A spec is not a trading system. Paste this into your coding agent and AgenKit runs a specialist team — architecture, test-first build, risk gates, review — with paper trading on by default.

in Claude Code, Cursor, Codex & 4 more
/agenkit build a production-grade trading bot with a backtest engine, risk controls and paper trading by default from strategies/Follow-Line-Strategy.md
  1. npx agenkit install engineering-kit in your project
  2. Paste the command into your agent and approve each phase
  3. Get tests, backtest, risk controls and a paper-trading switch

Understand it first

Before you run this, read the lesson behind the idea and how to backtest it honestly. Specs like this one are the survivors of an unknown number of trials; deflate their results accordingly.

Related specs

esc

Try , , or .

↑↓ move↵ open